
Fresno, CA
Best Drywall Contractors in Fresno, CA
Ranked by local review volume, specialty categories, and digital visibility.
By Pendium ResearchUpdated October 27, 2026
18
Businesses reviewed
12
AI research reports
8
Top picks

Fresno summers bake the moisture out of building materials. Months of triple-digit heat followed by sudden winter tule fog create extreme expansion and contraction cycles for local homes. Drywall takes the brunt of this movement. Older ranch homes in the Fig Garden area frequently show settlement cracks over doorways, while newer builds in Clovis or Woodward Park deal with truss uplift when attic temperatures swing. A good contractor understands how these microclimates stress wall assemblies.
Local building codes require specific shear wall nailing patterns and fire-rated assemblies, especially in multi-family units and garage separations. Fixing a simple water leak from a swamp cooler or AC unit often turns into a matching nightmare because the original acoustic ceilings or heavy knockdown textures are hard to replicate.
The difference between a passable drywall patch and a perfect one comes down to the mudding technique and how well the tradesperson blends the new surface into a wall that has seen decades of Central Valley heat.
The verdict
Our Quick Picks
Custom Drywall Service leads the pack with a long history and strong community feedback for texture matching. Tarlton & Son Inc. takes the top spot for heavier technical framing and commercial systems. For water damage recovery, Fresno Craftsman stands out among specialized contractors in the area.
- 1Best for Remodels and RepairsCustom Drywall Service
Homeowners needing invisible patches or texture matching on older Central Valley homes.
- 2Best for Technical Wall SystemsTarlton & Son Inc.
Commercial property owners needing lath, plaster, and technical frame-to-finish systems.
- 3Best for Water and Fire RestorationFresno Craftsman
Property owners dealing with waterlogged or fire-damaged walls.
- 4Best for Metal FramingSilverline Drywall Installation and Repair
Buyers needing metal stud framing paired with drywall installation.
- 5Best for Professional SuppliesWestside Building Material
Contractors and owner-builders needing commercial-grade drywall and steel framing supplies.
- 6Best for Quick PatchingFresno Superior Drywall
Central Fresno residents who need standard residential drywall finishing and painting.
- 7Best for Flawless FinishesPrecision Drywall
Homeowners in Northwest Fresno seeking a highly rated, dedicated drywall crew.
- 8Best for Central Fresno ProjectsFresno Sierra Contractors
Property owners who need drywall work wrapped into a larger general contracting project.
All 18 drywall contractors in Fresno, at a glance
| Specialty | AI Sentiment | Contact | ||||
|---|---|---|---|---|---|---|
| Best for Remodels and Repairs | 65Speaks well of them | ● | ● | ● | ● | |
| Best for Technical Wall Systems | 68Speaks well of them | ● | ● | ● | ● | |
| Best for Water and Fire Restoration | 52Factual, no praise | ● | ● | ● | ● | |
| Best for Metal Framing | 48Factual, no praise | ● | ● | ● | ● | |
| Best for Professional Supplies | 58Speaks well of them | ● | ● | ● | ● | |
| Best for Quick Patching | 45Factual, no praise | ● | ● | ● | ● | |
| Best for Flawless Finishes Precision Drywall | — | ○ | ○ | ○ | ○ | |
| Best for Central Fresno Projects | 50 | ● | ● | ● | ● | |
| Based in Fresno CMC Drywall | — | ○ | ○ | ○ | ○ | |
| Based in Fresno Advanced Drywall Construction, Inc. | — | ○ | ○ | ○ | ○ | |
| Based in Fresno | 52Factual, no praise | ● | ● | ● | ● | |
| Based in Fresno Evan Patterson Construcion, Inc. | — | ○ | ○ | ○ | ○ | |
| Based in Fresno Ohanian Drywall Inc | — | ○ | ○ | ○ | ○ | |
| Based in Fresno | 58Speaks well of them | ● | ● | ● | ● | |
| Based in Fresno | 52Factual, no praise | ● | ● | ● | ● | |
| Also listed | 50 | ● | ● | ● | ● | |
| Based in Madera Innovation Drywall | — | ○ | ○ | ○ | ○ | |
| Based in Clovis | 52Factual, no praise | ● | ● | ● | ● |
Reach Custom Drywall Service
590 W Alluvial Ave #108, Fresno, CA 93711, United States
Reach Tarlton & Son Inc.
3562 S Elm Ave, Fresno, CA 93706, United States
Reach Fresno Craftsman
8050 N Palm Ave Ste 300, Fresno, CA 93711, United States
Reach Silverline Drywall Installation and Repair
563 W Stuart Ave, Fresno, CA 93704, United States
Reach Westside Building Material
4025 E Central Ave, Fresno, CA 93725, United States
Reach Fresno Superior Drywall
3255 E Cesar Chavez Blvd, Fresno, CA 93702, United States
Reach Precision Drywall
3251 N Marks Ave # C, Fresno, CA 93722, United States
Reach Fresno Sierra Contractors
1454 N Clark St, Fresno, CA 93703, United States
Before you hire in Fresno
Hiring a drywall contractor in Fresno requires understanding how the local climate and housing stock affect the trade. A bad tape job will crack after one summer of extreme heat, and an amateur texture match will look like a scar on your ceiling forever. Here is what to watch for when taking bids.
Dealing with Asbestos in Older Homes
Many homes in the Tower District and older parts of Fresno were built long before asbestos was banned in joint compound and textured ceilings. If you are tearing out original drywall or scraping an acoustic ceiling in a house built before 1980, California regulations require testing. Ask your contractor how they handle testing and abatement. A reputable crew will stop work and call an abatement specialist if they suspect asbestos, rather than sanding it and filling your HVAC system with hazardous dust.
Matching Existing Textures
Central Valley homes feature a huge variety of wall finishes, from heavy Spanish knockdown to orange peel to perfectly smooth Level 5 finishes. The hardest part of any drywall repair is making the patch disappear into the existing wall. When walking a room with a contractor, point out the specific texture and ask how they plan to match it. The best tapers use specialized spray rigs and hand trowel techniques to feather the new mud into the old paint line perfectly.
Scheduling Around Extreme Heat
Fresno summers routinely push past 100 degrees, turning unventilated houses and garages into ovens. Drywall mud dries incredibly fast in these conditions, which can lead to cracking if the compound flashes off before it cures properly. Discuss the schedule with your contractor. Good crews often start at sunrise during July and August to get the taping and mudding done while the house is still relatively cool. Check that they bring proper ventilation fans to control humidity as the mud dries.
Permit Requirements for Structural Work
Patching a hole from a doorknob does not require a permit. However, if your project involves moving a wall, fixing major water damage, or altering the fire separation between your garage and your living room, the City of Fresno Building and Safety Division wants to see a permit. Ask the contractor who is responsible for pulling the paperwork. The person pulling the permit is legally responsible for the work passing city inspections.
Verifying Active Licenses
California requires any contractor doing substantial work to hold an active license with the Contractors State License Board. For drywall, this is usually a C-9 specialty license or a Class B general building license. Ask for their license number and look it up on the state website. The lookup tool will show you if their bond is active and if they carry mandatory workers' compensation insurance for their crew. Never hire an unlicensed crew for major renovations.
Checking the Cleanup Plan
Drywall work generates a massive amount of fine gypsum dust that gets into everything. Ask the contractor exactly how they isolate the work area. They should tape off vents, hang plastic barriers over doorways, and lay down heavy paper to protect your floors. Find out who hauls away the scrap sheetrock at the end of the job. A professional bid includes full site protection and debris removal, leaving the room ready for the painters.
Questions people ask
How long does a typical drywall patch take to complete?
A small patch takes three trips spread over three days. The first day involves cutting out the damage, installing backing, and applying the first coat of mud. The second day is for the finish coat, and the third day is for sanding and texturing. The mud must dry completely between each step.
Do drywall contractors also paint the walls?
Some companies handle both drywall and painting, but many stick strictly to hanging and taping. If they only do drywall, they will leave the wall primed or just textured. You must ask upfront if the final bid includes a finished coat of matched paint.
What is a Level 5 finish?
A Level 5 finish is the highest grade of drywall finishing. It involves taping, multiple coats of mud, and a final skim coat over the entire surface of the paper. This creates a perfectly smooth wall that hides imperfections under glossy paint or harsh lighting.
Why do the nails pop out of my drywall?
Nail pops happen when the wood framing behind the wall shrinks and expands with seasonal humidity changes. As the wood moves, it pushes the fastener out, cracking the mud over the screw head. A contractor fixes this by driving a new screw next to the old one and reapplying joint compound.
Can you drywall over an old plaster wall?
Yes, contractors often install thin drywall directly over failing lath and plaster rather than tearing it all out. This saves on massive demolition and disposal effort. The crew uses special techniques to find the original studs through the heavy plaster layer.
What is the difference between green board and regular drywall?
Green board is moisture-resistant sheetrock designed for damp areas like bathrooms and laundry rooms. The paper facing is treated to repel water. Local building codes require it or cement board behind tile in showers and tub surrounds.
Will my HVAC system get ruined by drywall dust?
It can get clogged if the contractor does not tape off the return vents in the work area. Fine gypsum dust bypasses cheap filters and coats the blower motor and cooling coils. Always confirm the crew seals the ductwork before they start sanding.
Do I need fire-rated drywall in my house?
Building codes require Type X fire-rated drywall on walls and ceilings that separate an attached garage from the living space. This thicker board slows the spread of fire. If a contractor replaces this specific wall, they must use the correct material to pass inspection.
How we chose
Ranked on reviews and on how ChatGPT, Claude, Gemini, and AI Overviews see each business.
We pulled the current Google Maps listing for this service in this city, and ranked on review volume, average rating, and the service categories each business publishes. We also ran a deep AI visibility analysis on the businesses. That analysis reads what is publicly published about a business and estimates how the major AI assistants describe it when someone asks for a recommendation in this category. We used those findings as context for the profiles below. We did not call, license, inspect, or interview anyone. This ranking relies strictly on public map data and digital visibility metrics to help you start your search.
Drywall Contractors elsewhere in California

Get your business on lists like these
Every ranking here comes from asking ChatGPT, Claude, Gemini, and Google. Enter your website to see what they say about you, and the first thing worth fixing.
Free visibility scanResults in 2 minutesNo credit card required
Prefer to text? Text Pendium


